AEG OKO_Lavamat 6100 digitronic

Home › Forums › Public Support Forums › Help And Support › Washing Machine Help Forum › AEG OKO_Lavamat 6100 digitronic

Viewing 9 posts - 1 through 9 (of 9 total)
  • Author
    Posts
  • June 12, 2017 at 10:24 am #91430
    AEGowner
    Participant

    E-Nr.605.648 372 F-Nr.094295696

    Hi, my trusty old AEG OKO_Lavamat 6100 digitronic washing machine seems to be leaking from underneath the rear left side as you face the machine. Is it likely to be something simple like a loose jubilee clip in that area that I could repair myself if I took the back off, or should I call an engineer? 😕

    June 12, 2017 at 10:27 am #448058
    electrofix
    Moderator

    Re: AEG OKO_Lavamat 6100 digitronic

    until you take the top off, run the machine and trace the leak you are not going to know if you can fix it
    with leaks it can come from anywhere. the leak could be at the front but run round inside the machine till it drips out the rear. all depends how level your floor is

    Dave

    June 12, 2017 at 11:24 am #448059
    AEGowner
    Participant

    Re: AEG OKO_Lavamat 6100 digitronic

    Thank you for your reply Dave. I have taken the back off and can see it is wet underneath a part towards the front of the machine on the rhs looking from the back. I have taken a photograph of it, but can’t see how to upload it 🙁

    June 12, 2017 at 12:24 pm #448060
    electrofix
    Moderator

    Re: AEG OKO_Lavamat 6100 digitronic

    when you click quick reply go to full editor and lower down the screen is an option to upload a file

    Dave

    June 12, 2017 at 12:43 pm #448061
    AEGowner
    Participant

    Re: AEG OKO_Lavamat 6100 digitronic

    Thanks again. Here is the pic (I hope!) 😀

    June 12, 2017 at 1:14 pm #448062
    electrofix
    Moderator

    Re: AEG OKO_Lavamat 6100 digitronic

    wow thats an old type of pump

    these pumps have a water seal that wears and starts to leak. If its dripping it needs to be replaced

    Dave

    on the one i looked up

    Gen part
    https://shop.ukwhitegoods.co.uk/8996454 … drain-pump

    or
    no gen part

    https://shop.ukwhitegoods.co.uk/ag5112- … drain-pump

    June 12, 2017 at 2:36 pm #448063
    AEGowner
    Participant

    Re: AEG OKO_Lavamat 6100 digitronic

    Thanks Dave. Yes, it’s 22 years old! 😛 Just working out whether it’s worth repairing…. Is there much difference in quality or would the no gen part be good enough, and how long should it take an engineer to replace it?

    June 13, 2017 at 1:07 pm #448064
    electrofix
    Moderator

    Re: AEG OKO_Lavamat 6100 digitronic

    the no gens are not too bad and judging by the price of the gen you could buy about 3 non gens.
    also at 22 years old you do not expect another 22 years so if you got 8 years out of a non gen that makes the machine 30

    Dave

    June 13, 2017 at 1:28 pm #448065
    AEGowner
    Participant

    Re: AEG OKO_Lavamat 6100 digitronic

    Thanks for your help and advice Dave 🙂

  • Author
    Posts
Viewing 9 posts - 1 through 9 (of 9 total)
  • You must be logged in to reply to this topic.