Thermal cut out – Leisure 100 Range Cooker

Home Forums Public Support Forums Help And Support Cooker And Oven Forum Thermal cut out – Leisure 100 Range Cooker

Viewing 8 posts - 1 through 8 (of 8 total)
  • Author
    Posts
  • #91549
    SeanJ_67
    Participant

    Good afternoon all,

    I wonder if someone can point me in the right direction please. I have an electric Zenith Leisure 100 Range Cooker ZE10CRA.

    The clock and fan overn have failed – yet the second oven & hob work fine. I believe it may be the thermal cut out? The problem I have is that although I can buy the part, I can’t find it anywhere on the oven! I’m looking for a button cut out ( like on a tumble dryer). I’ve lifted all the insulation away and I can’t find one. Does anyone know where it’s located please? I’ve seen pictures showing it as on the side wall, but it’s not there. Could it be I have a different type? There is a thick brown wire with some red sleeving in the middle – could that be some kine of couple?

    Many thanks

    Sean

    #448529
    kwatt
    Keymaster

    Re: Thermal cut out – Leisure 100 Range Cooker

    It should look like this and I think towards the rear:

    http://shop.ukwhitegoods.co.uk/21011054 … thermostat

    But shown as item 477 on the blowout attached.

    K.

    #448530
    SeanJ_67
    Participant

    Re: Thermal cut out – Leisure 100 Range Cooker

    Thanks, no sign of that at all.

    I do have this wore though – one on each oven. Thats all I can see on the chassis.[

    #448531
    kwatt
    Keymaster

    Re: Thermal cut out – Leisure 100 Range Cooker

    Yup, the looks like the older one if memory serves as I know they updated those a while back.

    K.

    #448532
    SeanJ_67
    Participant

    Re: Thermal cut out – Leisure 100 Range Cooker

    Ah, I wonder if that’s why the new ones have spade connectors included? So I can cut and fit the new type…

    S

    #448533
    kwatt
    Keymaster

    Re: Thermal cut out – Leisure 100 Range Cooker

    Pretty much, yes. That old type hasn’t been available for a few years now so it needs that new kit putting in.

    K.

    #448534
    SeanJ_67
    Participant

    Re: Thermal cut out – Leisure 100 Range Cooker

    Great, thanks for your help – I’ll order one now 🙂

    S

    #448535
    SeanJ_67
    Participant

    Re: Thermal cut out – Leisure 100 Range Cooker

    Morning,

    Ok, I’ve fitted the new cut out and all is well…except now the “keep warm” plate neon is lit constantly even though the knob is set to off.The plate doesn’t warm up. Now all I’ve done is swap the connections over on the cut out.

    It’s no big problem, just a bit odd!

    S

Viewing 8 posts - 1 through 8 (of 8 total)
  • You must be logged in to reply to this topic.