ADG7470/1 Flashes 8 times

Viewing 9 posts - 1 through 9 (of 9 total)
  • Author
    Posts
  • #91660
    rolf
    Participant

    Hello.
    I’ve got a Whirlpool dishwasher ADG7470/1—-854274715001.
    Drain pump runs and pauses a number of times then after 5 mins flashes 8 times.

    I popped the front cover off and was expecting to find a pressure sensor with the mesh but not on this newer type one.
    Would anyone be able to elaborate what 8 flashes is referring to.
    Thankyou.

    #448890
    electrofix
    Moderator

    Re: ADG7470/1 Flashes 8 times

    check your pm’s

    Dave

    #448891
    rolf
    Participant

    Re: ADG7470/1 Flashes 8 times

    Thank you very much Dave, it suggests it could be the OWI or pump problem but it drains fine so leaves me with a OWI problem.
    As far as I could see there isn’t one on the machine but the exploded diagram shows either a OWI or pressure switch in the same place but no part numbers. 😕
    Would you know how this machine knows its empty of water.
    Many thanks

    #448892
    electrofix
    Moderator

    Re: ADG7470/1 Flashes 8 times

    I am guessing here and reading between the lines.

    it says it has a load sensing circuit on the pump. that means it measures the current to the pump which will be lower when its empty ( like Bosch). it also means a worn pump will have a higher current and fool the electronics. possibly ?

    Dave

    #448893
    rolf
    Participant

    Re: ADG7470/1 Flashes 8 times

    Load sensing circuit more like no sense circuit. Looks like I’m going to have to buy my pump raffle ticket and keep my fingers crossed and hope its not the PCB.
    I’ll keep you posted.
    Roll up roll up !!
    Many thanks Dave, really appreciate your help.

    #448894
    jrrepair_2000
    Participant

    Re: ADG7470/1 Flashes 8 times

    Hi I have one of these doing the same thing. Did you manage to sort it ?Any help would be appreciated, thanks.

    #448895
    electrofix
    Moderator

    Re: ADG7470/1 Flashes 8 times

    I don’t know what the outcome of this case was but have sent you the same manual I sent Rolf. if your 12Nc number is different then don’t trust the parts list

    Dave

    #448896
    rolf
    Participant

    Re: ADG7470/1 Flashes 8 times

    It was a while back, and I struggle to remember what I did last week. But if I remember correctly I changed the pump and it did sod all, customer didn’t want to spend much on it so got wrote off.
    Sorry I cant help any more.

    #448897
    suedehead1
    Participant

    Re: ADG7470/1 Flashes 8 times

    I assume you have checked for broken wire at bottom of door.

Viewing 9 posts - 1 through 9 (of 9 total)
  • You must be logged in to reply to this topic.