Hotpoint SY10X Oven Timer Dead

Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › Hotpoint SY10X Oven Timer Dead

Viewing 8 posts - 1 through 8 (of 8 total)
  • Author
    Posts
  • July 14, 2017 at 12:38 pm #91680
    jontymox
    Participant

    Good afternoon,

    The above single oven’s timer is dead, so no functions working.

    I checked the terminal block, and all the associated wiring which is fine, so renewed the timer this morning.

    However, the unit remains dead, and I don’t know why.

    Is there any way of testing a timer conclusively, or should I suspect a faulty new unit?


    jonty

    July 14, 2017 at 3:01 pm #448963
    Martin
    Participant

    Re: Hotpoint SY10X Oven Timer Dead

    Is there power to the timer? Or maybe a connector block loose?

    July 14, 2017 at 3:16 pm #448964
    jontymox
    Participant

    Re: Hotpoint SY10X Oven Timer Dead

    Hello Martin,

    The only live testing I’ve done is from the terminal block, which is fine.

    I’ve inspected the terminal block, and all the relevant wiring which are all good.

    July 15, 2017 at 7:29 am #448965
    jontymox
    Participant

    Re: Hotpoint SY10X Oven Timer Dead

    Need to bring unit back to workshop, and wonder if there is a safe way of powering up the timer with the correct voltage?

    I cannot fathom why the timer is dead…

    July 15, 2017 at 8:19 am #448966
    aqualectric
    Participant

    Re: Hotpoint SY10X Oven Timer Dead

    Thermal cut out fitted to that oven – one shot type. Probably in line from the terminal block to the timer / selector switch.
    Hope that helps!

    Steve.

    July 15, 2017 at 9:42 am #448967
    jontymox
    Participant

    Re: Hotpoint SY10X Oven Timer Dead

    Thanks Steve,

    Yes, that certainly helps… will test and let you know early next week.


    Regards,

    Jon

    July 18, 2017 at 4:42 pm #448968
    jontymox
    Participant

    Re: Hotpoint SY10X Oven Timer Dead

    Have ordered a replacement timer, as TOC fine and power reaching unit.

    Update in a day or two.


    jonty

    July 19, 2017 at 8:12 pm #448969
    jontymox
    Participant

    Re: Hotpoint SY10X Oven Timer Dead

    Well, I replaced the suspect new timer, and all was well. (Clock & all oven functions fine.)

    However, upon fitting timer permanently it was found to be “dead” again!

    Have re-ordered, and hoping for third time lucky……


    jonty

  • Author
    Posts
Viewing 8 posts - 1 through 8 (of 8 total)
  • You must be logged in to reply to this topic.