Beko WMB91243 Washer Module

Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › Beko WMB91243 Washer Module

Viewing 3 posts - 1 through 3 (of 3 total)
  • Author
    Posts
  • July 18, 2017 at 6:04 pm #91711
    folleyball
    Participant

    The speed control has gone on this washing machine.

    It just ramps into full speed from nothing on wash or spin.

    The motor looks fine.

    Which module do I need to try. The main control module or the the Smaller DC module?

    July 18, 2017 at 6:53 pm #449028
    kaibart
    Moderator

    Re: Beko WMB91243 Washer Module

    Check the dc module if tracks are blown then that will need changing

    July 19, 2017 at 5:52 pm #449029
    Seamy
    Participant

    Re: Beko WMB91243 Washer Module

    If tracks were blown on DC module you would have no motor action.
    Main board would normally be at fault for the problem described, the tacho coil on motor needs to be checked also just in case.

  • Author
    Posts
Viewing 3 posts - 1 through 3 (of 3 total)
  • You must be logged in to reply to this topic.