Beko CDA539fw too cold

Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › Beko CDA539fw too cold

Viewing 3 posts - 1 through 3 (of 3 total)
  • Author
    Posts
  • September 8, 2017 at 7:32 am #92105
    mapelectrical
    Participant

    Hi All

    I have a Beko CDA539 that freezes the fridge when the stat is anywhere past the minimum setting.

    Any ideas?

    September 11, 2017 at 1:42 pm #450288
    Alanj
    Participant

    Re: Beko CDA539fw too cold

    Have you tried changing the stat? Usually a small pcb behind stat knob. Not expensive.

    https://connections.connect-distributio … y=cda539fw

    September 14, 2017 at 12:44 pm #450289
    smartin
    Participant

    Re: Beko CDA539fw too cold

    sorry to jump on your post but I am glad this has been posted, unless you are lucky replacing the potentiometer and pcb at the rear rarely works,most of the time its all to do with a foamed in sensor on fridge evaporator wall which has to be cut out and replaced, my question is, has anybody done one of these ? as there is no info on manusoft other than replacing freezer evap sensor. many thanks

  • Author
    Posts
Viewing 3 posts - 1 through 3 (of 3 total)
  • You must be logged in to reply to this topic.