Dcs68w

Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › Dcs68w

Viewing 3 posts - 1 through 3 (of 3 total)
  • Author
    Posts
  • September 11, 2017 at 1:29 pm #92131
    LJDomestics
    Participant

    Called to fit a new element to beko dryer as you cant replace the stats as you guys know.

    New element didnt heat so i put the old unit back and bypassed the grey thermistor wires to which it heated …checked the resistence with my meter and a lighter and the grey thermistor seems fine…
    Can anybody enlighten me to something ive overlooked? So basically old and new element= no heat.. both heat if grey thermistor ( 2 blue ) wires are conne ted together.

    Thanks

    Lee

    September 11, 2017 at 1:37 pm #450379
    Alanj
    Participant

    Re: Dcs68w

    Hi Lee, pcb?

    September 11, 2017 at 2:21 pm #450380
    LJDomestics
    Participant

    Re: Dcs68w

    Confused tbh alan….just been back there checked everything over again… tried it…it heated! Told the customer to try a couple of loads in it and let me know..maybe a loose wire maybe heater relay or pcb itself…who knows at this stage.

    Thanks for the quick reply ?

  • Author
    Posts
Viewing 3 posts - 1 through 3 (of 3 total)
  • You must be logged in to reply to this topic.