hotpoint BFT68X pump only pumps cannot select any programme

Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › hotpoint BFT68X pump only pumps cannot select any programme

Viewing 4 posts - 1 through 4 (of 4 total)
  • Author
    Posts
  • September 13, 2017 at 11:37 am #92146
    alro
    Participant

    hi gents have a hotpoint dishwasher BFT68X switch on shows 3 bars in display panel then pump comes on and does not stop untill you turn it off no water in base cannot select any programme tried reset. suspect pcb or can you get into a test programme if so how cheers alro

    September 13, 2017 at 1:27 pm #450408
    iadom
    Moderator

    Re: hotpoint BFT68X pump only pumps cannot select any progra

    No test programme, should show error messages in display, it is around 14 years old though. 🙁

    September 13, 2017 at 9:32 pm #450409
    alro
    Participant

    Re: hotpoint BFT68X pump only pumps cannot select any progra

    no customer says its about 6 to 7 years old built in has a full s/steel cosmetic door hope you can help

    September 14, 2017 at 8:34 am #450410
    iadom
    Moderator

    Re: hotpoint BFT68X pump only pumps cannot select any progra

    Customer is wrong. 😉

    Basically the same as the BFI68, also made in 2003. Don’t have a manual on the BFT but can send you the BFI68 if you want.

    Jim.

  • Author
    Posts
Viewing 4 posts - 1 through 4 (of 4 total)
  • You must be logged in to reply to this topic.