hotpoint BFT68X pump only pumps cannot select any programme

[alro]

hi gents have a hotpoint dishwasher BFT68X switch on shows 3 bars in display panel then pump comes on and does not stop untill you turn it off no water in base cannot select any programme tried reset. suspect pcb or can you get into a test programme if so how cheers alro

[iadom]

Re: hotpoint BFT68X pump only pumps cannot select any progra

No test programme, should show error messages in display, it is around 14 years old though. 🙁

[alro]

Re: hotpoint BFT68X pump only pumps cannot select any progra

no customer says its about 6 to 7 years old built in has a full s/steel cosmetic door hope you can help

[iadom]

Re: hotpoint BFT68X pump only pumps cannot select any progra

Customer is wrong. 😉

Basically the same as the BFI68, also made in 2003. Don’t have a manual on the BFT but can send you the BFI68 if you want.

Jim.

[Author]

Posts