OKO-lavamat 61300

Home › Forums › Public Support Forums › Help And Support › Washing Machine Help Forum › OKO-lavamat 61300

Viewing 4 posts - 1 through 4 (of 4 total)
  • Author
    Posts
  • October 5, 2017 at 1:04 pm #92313
    Delgado
    Participant

    This washing machine has a dial that sticks half way between “Quick wash and Rinse.
    Is this likely to be something I can fix? (ex RAF Aero-engine fitter).
    Thanks in advance,
    Delgado

    October 5, 2017 at 1:13 pm #450918
    electrofix
    Moderator

    Re: OKO-lavamat 61300

    this sounds like an older machine that makes things simple. when it stick you have to think what it might be trying to do that it cant

    i would look to see if the heater has failed first

    Dave

    October 5, 2017 at 3:51 pm #450919
    Martin
    Participant

    Re: OKO-lavamat 61300

    Or, the black rubber sump hose pipe that runs to the air pressure chamber is blocked with the dreaded ‘gunge’. 😕

    October 15, 2017 at 1:13 pm #450920
    Delgado
    Participant

    Re: OKO-lavamat 61300

    Reference the OKO-Lavamat dial sticking.
    The problem was a crack in the solder circuit on the small circuit board attached to the water inlet solenoids. Wriggling the elect. plugs set the machine going.
    Soldered a strip of elect. wire across the gap (allowing for movement) and the machine has now worked fine for several washes.
    Thanks to all who helped.
    Delgado.

  • Author
    Posts
Viewing 4 posts - 1 through 4 (of 4 total)
  • You must be logged in to reply to this topic.