Beko WM6355W spin problem

Home › Forums › Public Support Forums › Help And Support › Washing Machine Help Forum › Beko WM6355W spin problem

Viewing 4 posts - 1 through 4 (of 4 total)
  • Author
    Posts
  • October 10, 2017 at 9:20 pm #92358
    OlliePlimsolls
    Participant

    Hi all, bit of a strange one:

    This machine spins, but not as it should. The motor works in momentary ‘pulses’ at intervals of roughly a second or so. This is accompanied by a little squeak as the belt slips slightly.

    I’ve entered the test mode and it’s given an error code of ‘F06’ which I can’t for the life of me find the description for.

    If I cycle through the test mode, it will spin up nicely to the full 1500rpm high speed spin speed and sit there happily. But on the low speed (whatever it is during the actual wash cycle) spin test it does the strange pulsing behaviour.

    Any ideas?

    Thanks in advance.

    October 10, 2017 at 9:53 pm #451060
    electrofix
    Moderator

    Re: Beko WM6355W spin problem

    can you check the model I cant find it

    Dave

    October 11, 2017 at 5:39 am #451061
    OlliePlimsolls
    Participant

    Re: Beko WM6355W spin problem

    Hi, it’s definitely WM6355W.

    It’s an older model, from around 2010-ish.

    Bit grubby now from having had my fixing mitts all over it!

    If it helps, it’s identical in appearance to the WM5100 model, but with the addition of a digital display/timer on the panel.

    October 12, 2017 at 9:47 am #451062
    electrofix
    Moderator

    Re: Beko WM6355W spin problem

    just seen your reply don’t know why I could not see it and not got time to check now
    but from fault description sounds like a tacho magnet fault

    Dave

  • Author
    Posts
Viewing 4 posts - 1 through 4 (of 4 total)
  • You must be logged in to reply to this topic.