- This topic has 3 replies, 2 voices, and was last updated 20 years, 11 months ago by
.
-
Posts
-
my washer/dryer will not stop water filling as long as the dryer switch is on (any position). As soon as the switch is turned off, the water immediately stops water filling. Any ideas?
Re: Indesit WD10 wont shut off water supply
You mean it does this even if the dryer timer is set even during a wash cycle ?
If so, it’s an odd one, it all points towards the control PCB to be honest but I would suggest an engineer to check this one to be honest.
Have a look in repairs@ and the directories for one.
Dave.
Re: Indesit WD10 wont shut off water supply
Hi,
It does this even during the wash cycle, as long as the drier timer is on. In the meantime, I have disconnected the wires going to the drier switch and everything else appears to be normal. Where can I get a replacement module?Re: Indesit WD10 wont shut off water supply
If you post up the serial number I can check the module price etc for you, but I would discount all other possibilities first as i’m only making an assumption on the information.
You won’t get much change from £100 for the PCB and if it doesn’t solve the problem ….
Don’t forget to pull that plug eh 😉 :zap:
Dave.
- You must be logged in to reply to this topic.