UHS53X Grill

Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › UHS53X Grill

Viewing 9 posts - 1 through 9 (of 9 total)
  • Author
    Posts
  • January 17, 2018 at 4:15 pm #93090
    rolf
    Participant

    Hi any pointers appreciated. Got a Hotpoint built under oven UHS53X. When you select grill fan comes on but no neon and no power to the grill element. If you select top oven on a different control the element comes on.
    I’ve changed the energy regulator but still the same 😳 so I’m thinking there’s a possible stat causing it, but would of thought the top oven wouldn’t work if that’s the case.
    large toc in center Closed circuit small toc by the fan open circuit at room temp.
    Please help!!!!!!!!

    January 17, 2018 at 4:32 pm #453207
    electrofix
    Moderator

    Re: UHS53X Grill

    have you looked at the function switch on the top oven control ?

    Dave

    January 17, 2018 at 4:35 pm #453208
    alster
    Participant

    Re: UHS53X Grill

    Looks like there’s a microswitch on the grill door. I would check that Al

    January 17, 2018 at 5:11 pm #453209
    rolf
    Participant

    Re: UHS53X Grill

    Hi Alster, thanks for your advice. I noticed on the parts list there is a grill/door switch but when I went out to the oven there is no visible switch on the top oven/Grill. There is one on the bottom oven.
    Am I missing something. Thanks

    January 17, 2018 at 5:15 pm #453210
    rolf
    Participant

    Re: UHS53X Grill

    Hi Dave had a quick look but didn’t pay much attention to it. Is there something I should of been looking at.

    January 17, 2018 at 6:12 pm #453211
    electrofix
    Moderator

    Re: UHS53X Grill

    since it uses the same elements. that switch changes them over from oven to grill so your looking for contacts that are either burnt out or just don’t quite make it. There will prob be a wire from that switch to live in on the grill regulator. if so check that contact first

    Dave

    January 17, 2018 at 6:58 pm #453212
    rolf
    Participant

    Re: UHS53X Grill

    Emmm food for thought. I did have a quick look over the contacts and there was nothing obvious burnt out but I guess it could be something more subtle. I’m going to try and get back out there and have another gander.
    Thank you for your advice Dave.

    January 31, 2018 at 6:01 pm #453213
    rolf
    Participant

    Re: UHS53X Grill

    Ten points to Dave. New selector sorted it. 😀

    Thanks a lot. Really appreciate all your help.
    :tup:

    January 31, 2018 at 10:48 pm #453214
    electrofix
    Moderator

    Re: UHS53X Grill

    no probs m8

    glad u sorted it

    Dave

  • Author
    Posts
Viewing 9 posts - 1 through 9 (of 9 total)
  • You must be logged in to reply to this topic.