siemens d/w no heat

Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › siemens d/w no heat

Viewing 3 posts - 1 through 3 (of 3 total)
  • Author
    Posts
  • January 20, 2018 at 5:40 pm #93111
    clockworkone
    Participant

    se65e332gb/10. Checked element and seemed ok still no heat. Had a look at board and all seemed good there. Let machine run and fill but no heat. Had a look at heater micro sw. Switch itself working but actuator in element not moving even when water up to level Activated micro sw manually and started to heat. I take it that means a new element or is there anything that can be done to free it up.

    January 20, 2018 at 6:22 pm #453253
    electrofix
    Moderator

    Re: siemens d/w no heat

    is it getting enough water to pressurize switch , try adding a bit more

    Dave

    January 20, 2018 at 8:34 pm #453254
    Martin
    Participant

    Re: siemens d/w no heat

    ……and check the circulation pump impeller. Could be crud blocking it?

  • Author
    Posts
Viewing 3 posts - 1 through 3 (of 3 total)
  • You must be logged in to reply to this topic.