Hotpoint FDAL28P dishwasher fault

Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › Hotpoint FDAL28P dishwasher fault

Viewing 3 posts - 1 through 3 (of 3 total)
  • Author
    Posts
  • January 23, 2018 at 11:05 am #93134
    lyndy
    Participant

    Hi,

    We’ve looked at a Hotpoint dishwasher FDAL28P (SN 212053456 / 36769880100) with a fault and wondered if anyone can shed any light on the cause? Details as follows:

    Machine will start ok and wash for 5 mins on the daily wash cycle. After five minutes the following lights flash and the machine drains and stops.

    Start/pause – constant rapid flash
    Wash – constant rapid flash
    End – constant rapid flash

    We’ve checked to see if this is a leak-into-base job but there is no water in the base tray and we can’t see a leak anywhere.

    Once the machine faults, it can be reset and will start again as above before faulting again.

    Any suggestions?

    Thanks in advance.

    January 23, 2018 at 1:25 pm #453314
    iadom
    Moderator

    Re: Hotpoint FDAL28P dishwasher fault

    99{e5d1b7155a01ef1f3b9c9968eaba33524ee81600d00d4be2b4d93ac2e58cec2d} certain it uses the same codes as the FDL range. Sadly looks like 1+3+4. 🙁

    Jim.

    January 23, 2018 at 1:27 pm #453315
    lyndy
    Participant

    Re: Hotpoint FDAL28P dishwasher fault

    Thank you – very useful. We couldn’t find the fault codes for it anywhere. But yes, looks like a bad result!

  • Author
    Posts
Viewing 3 posts - 1 through 3 (of 3 total)
  • You must be logged in to reply to this topic.