- This topic has 5 replies, 3 voices, and was last updated 8 years, 2 months ago by
.
-
Posts
-
Good morning all,
Wondering if anyone could provide a wiring diagram for the above T/D?
Called by customer to rectify a no heat fault, who has already replaced several parts himself. (heater unit, front sensor, and pcb)
Heat is evident very intermittently, and I suspect a wiring fault unless there is another sensor somewhere. (have checked related wiring continuity thus far, but was running late for next job.)
Thanks,
jonty
Re: Candy GOC58F-80 (3110036312371239) Tumble Dryer
Hi jonty I attach a wiring diagram for you more than likely the new pcb needs programming with men loader Hoover has, this condenser has 2 ntcs 1 on the front duct and 1 under the drum in the rear left i would suggest fitting all the old parts back on and starting from scratch as the old pcb is probably fine, its always a head ache when customers try to fix themselves. Kai
Re: Candy GOC58F-80 (3110036312371239) Tumble Dryer
Thank you Kai,
Will re-visit early next and let you know how it goes.
Thanks again,
jonty
Re: Candy GOC58F-80 (3110036312371239) Tumble Dryer
Good evening Kai, everyone,
Returned today, and carried out further tests and confirmed that the pcb/board is faulty.
Customer then confirmed that he bought the replacement board second hand, and he is planning on sending it somewhere for test and repair!
jontyRe: Candy GOC58F-80 (3110036312371239) Tumble Dryer
chances are the relays have blown. at least that’s the first thing I would check
Dave
- You must be logged in to reply to this topic.