hoover oven

Home › Forums › Trade Technical & Spare Parts Forums › Trade Spare Parts › hoover oven

Viewing 10 posts - 1 through 10 (of 10 total)
  • Author
    Posts
  • February 12, 2018 at 5:07 pm #93307
    tash
    Participant

    hi hope this is in the right forum.. i needed a main oven selector switch for a hoover double oven HDO909x
    33701193 13440034
    i ordered it directly from hoover they sent me pt 42814656
    unfortunately it’s different to the original and won’t fit contracted them said there’s another switch
    pt 91204784 but this is almost identical to the first and won’t fit either.. original looks completely different and has a connection block to attach.. any help appreciated.. thanks

    February 12, 2018 at 5:40 pm #453873
    iadom
    Moderator

    Re: hoover oven

    Not that sure but the code 33701193 brings up two models, one Forno Inferiore the other Forno Superiore.

    The selector switch for the Superiore is different to either of the ones you have listed and it is a 41003026 as far as I can see.

    This is a picture of it, looks just like the other one though?

    February 12, 2018 at 6:26 pm #453874
    tash
    Participant

    Re: hoover oven

    thanks for that.. that switch looks same as the ones they sent tbh.. yes on the plate it gives 2 models..thanks

    February 12, 2018 at 6:42 pm #453875
    electrofix
    Moderator

    Re: hoover oven

    have edited your post and pictures to make it easier

    what’s the number on the switch under your thumb ? 09 was often hoover part numbers

    Dave

    February 12, 2018 at 6:43 pm #453876
    tash
    Participant

    Re: hoover oven

    thanks

    February 12, 2018 at 7:19 pm #453877
    iadom
    Moderator

    Re: hoover oven

    Can only see one model number on that plate, the 1344 number is a date code.

    Can’t see any mention of an alternative switch/wiring in the tech bulletins either. 🙁

    February 12, 2018 at 7:39 pm #453878
    tash
    Participant

    Re: hoover oven

    yea it says hdo909x and hdo906x on that plate.. yes i stupidly put my finger over that no but it starts with the one they sent 91204.. probably end up having a hoover engineer

    February 12, 2018 at 8:12 pm #453879
    electrofix
    Moderator

    Re: hoover oven

    have you looked at the switches closely?

    do the units have numbers on the terminals that match up ?

    maybe a case of cutting wires to multiplug and putting separate terminal on

    if it was me I would remove old switch and use a multimeter to find out which contacts open and close and do the other switched match. I assume you have both options to try this

    Dave

    February 12, 2018 at 8:22 pm #453880
    tash
    Participant

    Re: hoover oven

    yes that’s an option but was hoping for direct replacement.. numbers n tags don’t match unfortunately but sure i can work it out

    February 15, 2018 at 9:20 am #453881
    tash
    Participant

    Re: hoover oven

    second switch fitted now..cut off connectors

  • Author
    Posts
Viewing 10 posts - 1 through 10 (of 10 total)
  • You must be logged in to reply to this topic.