- This topic has 6 replies, 4 voices, and was last updated 8 years, 1 month ago by
.
-
Posts
-
Hi guys I have problems with a SN66T094GB/32 which keeps having the door latch go to the closed position but not locking the door closed. I have replaced the latch but intermittently does this. I can’t see anything out of shape on the door panel, the side springs are fine and it does this even with the integrated door removed. Has anyone had this issue?
Thanks, DarrenRe: Siemens DW door issues
when door is open and in the down position, make sure there door isnt bent below the 45 degrees angle
Re: Siemens DW door issues
If the appliance hasn’t been fixed into position properly, sometimes the closing of the door can push the whole appliance slightly back and so it doesn’t close properly.I have had that happen quite a few times.
Re: Siemens DW door issues
blackandwhites wrote:If the appliance hasn’t been fixed into position properly, sometimes the closing of the door can push the whole appliance slightly back and so it doesn’t close properly.I have had that happen quite a few times.
especially if the unit is under a granite worktop and they have fitted a wooden cross piece and then fitted the outer door higher so it hits itDave
- You must be logged in to reply to this topic.