indesit ide 1000 flashing display

Home › Forums › Public Support Forums › Help And Support › Dishwasher Help Forum › indesit ide 1000 flashing display

Viewing 7 posts - 1 through 7 (of 7 total)
  • Author
    Posts
  • May 3, 2005 at 7:47 am #9345
    admin
    Keymaster

    I have an indesit ide 1000 dishwasher.
    When switched on the display strobes at high speed. Non of the controls function.
    I have an electronics backgroudn and am happy to repair the machine but any ideas on known weak spots or problem areas would be appreciated.

    May 3, 2005 at 7:55 am #133636
    Martin
    Participant

    Re: indesit ide 1000 flashing display

    Anthony-Bethany wrote:I have an indesit ide 1000 dishwasher.
    When switched on the display strobes at high speed.

    You need to count the number of flashes between the slight pause, which acts as an ‘error code?’

    Martin

    May 3, 2005 at 10:15 am #133637
    admin
    Keymaster

    Re: indesit ide 1000 flashing display

    It flashes very quickly with no noticeable pause

    May 3, 2005 at 11:28 am #133638
    Martin
    Participant

    Re: indesit ide 1000 flashing display

    Anthony – Bethany wrote:It flashes very quickly with no noticeable pause

    Nevertheless there should be a slight pause, unless your machine has gone totally AWOL for some reason. (Your electronic no-how may come in handy if it has 8) )

    You have ‘reset’ it have’nt you (see users manual on how to)??

    Martin

    May 4, 2005 at 9:51 am #133639
    admin
    Keymaster

    Re: indesit ide 1000 flashing display

    Martin, thank you for trying to help.

    The power supply board had gone. I connect another 5 volt power supply and it works fine.

    Indesit want £66 for a replacement but there appears to be a suitable alternative in the Farnell catalogue for £18. I’ll just have to chop the connectors off and solder the wires to the board. For a saving of over £40 I’m happy to do that

    May 4, 2005 at 12:10 pm #133640
    Martin
    Participant

    Re: indesit ide 1000 flashing display

    Anthony – Bethany wrote:The power supply board had gone.

    Thanks Anthony for letting us know the outcome 😀

    Martin

    September 16, 2005 at 6:21 pm #133641
    tezor
    Participant

    Re: indesit ide 1000 flashing display

    Anthony-Bethany wrote:I have an indesit ide 1000 dishwasher.
    When switched on the display strobes at high speed. Non of the controls function.
    I have an electronics backgroudn and am happy to repair the machine but any ideas on known weak spots or problem areas would be appreciated.

    As a new member I was hoping to contact Anthony Bethany and ask which Farnel part number he used for the power supply?
    I have exactly the same problem with my IDE 1000, must be a design fault.
    Ta Terry

  • Author
    Posts
Viewing 7 posts - 1 through 7 (of 7 total)
  • You must be logged in to reply to this topic.