BEKO DSC85W Clean Filter and Iron dry light on

Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › BEKO DSC85W Clean Filter and Iron dry light on

Viewing 2 posts - 1 through 2 (of 2 total)
  • Author
    Posts
  • March 5, 2018 at 7:21 pm #93469
    Taff543489
    Participant

    Went this machine today the Iron Dry and Clean Filter light was on. I carried out the usual checks, condenser cartridge and filter ok and the condensate pump was working as was the float switch, there was some lint in the bottom of the tank but not so much that would prevent the pump draining but I cleaned this any way. I placed a load in the machine and it ran for some 20 minutes before the lights came on, the washing to my thinking was scalding, you couldn’t hold it was that hot!!! I believe it could be a fire risk!!! Is there a sensor that controls the heat and if so where is it located? What would cause the lights to come on?
    Regards
    Taff

    March 5, 2018 at 10:24 pm #454435
    electrofix
    Moderator

    Re: BEKO DSC85W Clean Filter and Iron dry light on

    don’t know why the light are on tech does not mention it as a fault code

    as normal on dryers there are 2 ntc one on the heater and the other on the door filter area to detect exhaust air


    have pm’ed you the only tech available hope it helps

    Dave

  • Author
    Posts
Viewing 2 posts - 1 through 2 (of 2 total)
  • You must be logged in to reply to this topic.