- This topic has 4 replies, 3 voices, and was last updated 8 years ago by
.
-
Posts
-
I have the Vax mach 3 stretch u91-MA-B
I have this and it needs its belt changed, I have the instruction leaflet it has nothing on to how to belt change I thought NVM I cant find the exact same model band change instructions anywhere but figured could be any different then other similar makes , long sorry short all visible screws on the head removed still not coming of anyone know how you change the belt on this specific make/model
Thank youRe: Belt change for Vax Strech
are you sure it has a belt
does not list one for this model on Vax site
also on list of problems
Brushbar not turningSomething has obstructed the brush bar. Remove brushbar cover and clear any debris from around the brushbar itself
Recline the machine until it is lying flat on the floor
Press the brushbar reset button (located on the side of the machine) 3 times
Press the power button to switch the machine back on
The green light should now display and the brushes should be turning
no mention of a belt !!Dave
Re: Belt change for Vax Strech
Hello there is no light on it at all not even red error light , I have already tried what you suggested and no joy but jst tried again with same result 😥
Re: Belt change for Vax Strech
if it wont work time to buy a new one
you wont get the spares to repair it
Vax are cheap Chinese junk
Dave
Re: Belt change for Vax Strech
Hi
Before you throw it away a lot of Vax machines around your model number had a six year guarantee. Check out the support link here if you can’t solve the problem then give them a ring, have the full model and serial number to hand as they may swap it out for you.
Don
- You must be logged in to reply to this topic.