Blomberg washer 1500AW main circuit board

Home › Forums › Public Support Forums › Spare Parts Help › Blomberg washer 1500AW main circuit board

Viewing 5 posts - 1 through 5 (of 5 total)
  • Author
    Posts
  • May 3, 2005 at 7:35 pm #9359
    pilott
    Participant

    Hi ,

    Am looking for the main circuit board/ timer control for a blomberg 1500AW washing machine. The numbers on the label are as follows:

    “TYP
    513 501

    BLOMBERG- 12 113 10

    258″

    May 3, 2005 at 11:51 pm #133701
    Penguin45
    Participant

    Re: Blomberg washer 1500AW main circuit board

    You absolutely sure about this? The machine is a Comet exclusive, part number is 55×6544, £153.78 plus VAT and P+P. 😯 Before spending your dosh, might be an idea to explain your problem.

    Regards,
    Penguin45.

    May 4, 2005 at 7:37 am #133702
    pilott
    Participant

    Re: Blomberg washer 1500AW main circuit board

    Penguin45 wrote:You absolutely sure about this? The machine is a Comet exclusive, part number is 55×6544, £153.78 plus VAT and P+P. 😯 Before spending your dosh, might be an idea to explain your problem.

    Regards,
    Penguin45.

    Yes you are correct, it was Purchases from Comet.
    Re the fault. The water keeps filling the drum and eventuallyrises to a level where it breaks the door seal and leaks. The circuit board has many black, sooty tracks across it. ❓

    Sounds terminal at almost £200

    May 4, 2005 at 8:24 am #133703
    Penguin45
    Participant

    Re: Blomberg washer 1500AW main circuit board

    Check this first………
    http://www.ukwhitegoods.co.uk/modules.p … t=blomberg

    The black marks may just be dusty deposits – pull the plug before investigating.

    Regards,
    Penguin45.

    May 4, 2005 at 3:41 pm #133704
    pilott
    Participant

    Re: Blomberg washer 1500AW main circuit board

    penguin45

    You are an ABSOLUTE STAR!!! What can I say…………

    The other thread proved most useful, and in unclogging the “bell chamber” I found that the hose leading from it had worn away aginst the back of the drum allowing air to enter. Hose replaced for 25p and all now seems well…fingers crossed.

    Once again, thank you very, very much. 😀 😀

  • Author
    Posts
Viewing 5 posts - 1 through 5 (of 5 total)
  • You must be logged in to reply to this topic.