Indesit IWC81251 Constant filling

Re: Indesit IWC81251 Constant filling

when does it start to fill, as soon as you turn on or after you select and start a programme ?

if you pause the programme does it still fill or does it stop ?

Dave

Re: Indesit IWC81251 Constant filling

In that case it sounds like the control board

most components in the machine are controlled by the board using electronic switches called triacs. The triac that controls the valve sounds like its failed and needs to be replaced. Anyone who has a knowledge of electronics and soldering could do it all that needs to be done is find the faulty one and fine a replacement

if you don’t feel up to it contact

http://www.qer.biz/servReps.htm

and see if they can look at the board and test for this fault

Dave

Re: Indesit IWC81251 Constant filling

problem with indesit is the boards come blank and have to be programmed in the machine. I cant do one without purchasing a programmer and the software to do it

so its not a amateur repair in fact its not a easy repair for anyone except the
manufacturer or someone who can change electronic components on the board

where was the machine bought ?

Dave

Re: Indesit IWC81251 Constant filling

Looks like you may have to bite the bullet and go to Hotpoint direct in France.

Don

Re: Indesit IWC81251 Constant filling

as long as that is the problem yes can be done

part is cheap at only a few pounds

if you remove board and put same board back after repair then it does not need programming

I also assume you have checked guarantee. I assume it the same as uk and covered for 12 months but I cant read French to check

Dave