- This topic has 4 replies, 3 voices, and was last updated 7 years, 11 months ago by
.
-
Posts
-
Can someone help? The job is a bosch WAK28261gb/11 error E21. Replaced worn brushes and tested motor (ok). Cant get error code to clear, starting with knob at 12 o’clock I’ve turnet knob to 6 o’clock, pressed rpm button then turned knob to 7 o’clock, held for 5 seconds and released, turn knob back to 12 o’clock but its not cleared. Is there a different reset for this model? Thanks for any help.
Re: Clear error e21
……or try unplugging the motor then carry out the usual 6 o’clock reset procedure. Plug the motor back in and repeat that procedure…..fingers crossed 😉
Re: Clear error e21
also from my experience you have to do the reset procedure in a methodical way
turn to 6 (wait 2 secs)
press and hold spin button (wait 2 secs)
turn knob to 7 (wait 2 secs)
now release spin speed buttonat this point the start button might well start flashing which means success. turn machine off and on again and see if it works
have had other dealers say it can take several attempts to reset and I myself have had it take 2 or 3
Dave
Re: Clear error e21
Sorted now thanks, it was different, from 12 o’clock press and hold start button and turn left one click, release start button and turn off. Thats it.
- You must be logged in to reply to this topic.