Zanussi ZKG7145 914604048/01 washer dryer

Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › Zanussi ZKG7145 914604048/01 washer dryer

Viewing 3 posts - 1 through 3 (of 3 total)
  • Author
    Posts
  • May 24, 2018 at 5:05 am #93957
    dunston
    Participant

    This is a continuation of a previous repair and post.
    We replaced the Dryer PCB Assembly 1324478203 and it worked in a few days.
    However now when you select tumble dryer;
    Fills through correctly thro. dryer valve into condenser.
    Fills to active pressure switch.
    The dryer motor turns once only.
    Then the wash side of the fill valve opens and fills to first level, aborts program and displays 1.Diagnostic check shows E66.
    We have check for earth faults. Cannot find any.
    Can anyone help.

    May 24, 2018 at 6:16 am #456024
    kaibart
    Moderator

    Re: Zanussi ZKG7145 914604048/01 washer dryer

    Try disconnecting the dryer element then run it these give loads of weird faults

    May 24, 2018 at 10:23 am #456025
    dunston
    Participant

    Re: Zanussi ZKG7145 914604048/01 washer dryer

    Tried disconnecting dryer elements and wash element – same problem.
    On wash it fills and washers for a couple of minutes then aborts.
    Displays 1. Stops full of water.
    Diagnostic shows E66

  • Author
    Posts
Viewing 3 posts - 1 through 3 (of 3 total)
  • You must be logged in to reply to this topic.