Hotpoint tdc32s condenser dryer

Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › Hotpoint tdc32s condenser dryer

Viewing 6 posts - 1 through 6 (of 6 total)
  • Author
    Posts
  • June 3, 2018 at 1:20 pm #94008
    Galway
    Participant

    Hi.
    Replaced front and rear bearings on this tumble dryer and it running smoothly now.but the other fault customer was complaining about was the was no water in tray.I have checked and cleaned all relevant parts while drum was out but still no water in tray.the utility room is steamy when machine is running.the door seal looks ok and condenser is clean and seal looks ok.anybody have any ideas?thanks

    June 3, 2018 at 2:44 pm #456168
    alster
    Participant

    Re: Hotpoint tdc32s condenser dryer

    Is the rear drum seal ok?

    June 3, 2018 at 4:57 pm #456169
    electrofix
    Moderator

    Re: Hotpoint tdc32s condenser dryer

    Yes it does sound like the steam is getting out of the drum into the room so drum seals would be my first check

    Dave

    June 3, 2018 at 6:46 pm #456170
    Galway
    Participant

    Re: Hotpoint tdc32s condenser dryer

    Hi
    Thanks for replies.
    I didn’t change rear drum seal as it looked pretty good.I will change it and see if it works.
    Thanks

    June 3, 2018 at 8:01 pm #456171
    electrofix
    Moderator

    Re: Hotpoint tdc32s condenser dryer

    Have a good look at the front one as u strip it. Had one where the drum was warped and there was no way it would ever seal

    Dave

    June 4, 2018 at 8:54 am #456172
    Galway
    Participant

    Re: Hotpoint tdc32s condenser dryer

    Thanks
    Will have a look at it during the week.

  • Author
    Posts
Viewing 6 posts - 1 through 6 (of 6 total)
  • You must be logged in to reply to this topic.