AEG F34030V10 3 flashes.

Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › AEG F34030V10 3 flashes.

Viewing 3 posts - 1 through 3 (of 3 total)
  • Author
    Posts
  • June 11, 2018 at 7:35 am #94043
    Geoff1312
    Participant

    hi all.
    Called to above dishwasher it drains for a while , stops then flashes r/h light 3 times and carries on doing just that. There is no water in base and you can hear anti flood click when triggered manually any ideas please , thanks in anticipation
    Geoff 1312.

    June 11, 2018 at 8:15 am #456259
    electrofix
    Moderator

    Re: AEG F34030V10 3 flashes.

    fault lists as

    Water leakage from the tub – sump and various
    connections (pump, upper spray arm duct etc.);
    floating sensor blocked mechanically; microswitch
    faulty; fill solenoid blocked mechanically; circuit
    board faulty (solenoid triac short-circuited); wiring faulty

    there are 30 machines with the same model number ( should always post Pnc No) so will pick one at random and pm you a manual

    Dave

    June 11, 2018 at 4:11 pm #456260
    Geoff1312
    Participant

    Re: AEG F34030V10 3 flashes.

    Hi Dave.
    PNC is 91153904605 there is no waterin the base and float and switch are functioning ok.
    Regards Geoff.

  • Author
    Posts
Viewing 3 posts - 1 through 3 (of 3 total)
  • You must be logged in to reply to this topic.