Cda/ white knight dryer Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › Cda/ white knight dryer This topic has 6 replies, 3 voices, and was last updated 7 years, 10 months ago by kaibart. Viewing 7 posts - 1 through 7 (of 7 total) Author Posts June 12, 2018 at 6:00 am #94047 kaibartModerator Hi guy got this cad/ white knight dryer model number Ci921 030483115021 with no heat checked heater fine checked all stats fine so I suspected pcb fitted pcb work when I was ther now it has recalled any ideas where I should be looking Tia kai June 12, 2018 at 10:24 pm #456269 suedehead1Participant Re: Cda/ white knight dryer did you check the exhaust thermostat on the duct near the motor June 13, 2018 at 6:05 pm #456270 kaibartModerator Re: Cda/ white knight dryer Yes all checked I’m baffled June 15, 2018 at 6:15 pm #456271 kaibartModerator Re: Cda/ white knight dryer I’ve changed the pcb heater resettable stat and exhaust stat and I have no power to the heater anybody any ideas June 15, 2018 at 8:47 pm #456272 electrofixModerator Re: Cda/ white knight dryer well looking at the wiring diagram it could not be simpler so cant think why its not working few thoughts its a sensor dryer so may not heat without lots of damp clothes in it on the same note if the drum sensors are not connected to the board or compromised in some way so as to make the board think the clothes are dry Dave June 16, 2018 at 7:35 am #456273 kaibartModerator Re: Cda/ white knight dryer I’ve got resistance between the paddle and brush aswell what’s got me it’s something I’m overlooked somewhere but I can’t think what June 16, 2018 at 8:44 am #456274 electrofixModerator Re: Cda/ white knight dryer its so simple there is almost nothing to overlook have you double checked there is only 1 board for these machines and there is no way you could have connected it wrong accidently Dave Author Posts Viewing 7 posts - 1 through 7 (of 7 total) You must be logged in to reply to this topic. Log In Username: Password: Keep me signed in Log In