Stoves oven door hinge removal.

Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › Stoves oven door hinge removal.

Viewing 3 posts - 1 through 3 (of 3 total)
  • Author
    Posts
  • June 20, 2018 at 6:20 pm #94102
    aqualectric
    Participant

    Stoves double oven. Model no:- 444445111. Serial no:- 60707275.

    The hinges have been strained and the door is sloping down from the normal right angle position.
    Got 2 new hinges today but can’t work out how they fit or lock off to facilitate removal of the door. Want to be able to go in tomorrow and bop…. in they go.

    Any ideas how to take the doors off these ovens?

    Thanks!!

    Steve,.

    June 20, 2018 at 7:09 pm #456458
    electrofix
    Moderator

    Re: Stoves oven door hinge removal.

    hinge I can see is this one

    https://shop.ukwhitegoods.co.uk/0829708 … door-hinge

    if yes could not be easier to fit

    lower door there is a screw half way up the door on the inside. either side of the inner glass. remove these 2 screw
    close door almost and it should stay slightly open. get hold of outer door and lift off

    undo oven from housing and slide out about 8 inches. just enough to undo 2 screws either side that hold hinge

    reverse process and your there. can be a little tricky getting the door back on as the hinge stems have to go up the correct channel

    Dave

    June 20, 2018 at 8:26 pm #456459
    aqualectric
    Participant

    Re: Stoves oven door hinge removal.

    Thanks Dave; never had to do one of these types of hinge before and as the whole door is dependent on a pair of channels glued to the glass panel, asking was cheaper than breakage!

    Cheers for that!

    Steve.

  • Author
    Posts
Viewing 3 posts - 1 through 3 (of 3 total)
  • You must be logged in to reply to this topic.