- This topic has 3 replies, 2 voices, and was last updated 7 years, 9 months ago by
.
-
Posts
-
Hi,
I’ve been out to a Zanussi tumble dryer this afternoon, ZDC8202P, Prod no. 916097379 00, and all that happens is the red start pause button flashes red as soon as you press it to start.
If I go in to what I suspect is the diagnostic, similar way to the washing machines, (not had much practice on this machine yet), and press the programme button a few times, the start button flashes 11 times red and the yellow light 14 times.
Is this a fault code?If anybody can help it would be appreciated.
Nick
Re: Zanussi Lindo300 Tumble dryer flashing red
if the flashes are a fault code as you sat it does not make sense
red flashes 11 puts first letter B (H on led machines)
second digit 4 does not exist but all B fault codes as to do with supply problems and normally mean main board failure unless the supply is faultanyway see if it will run diagnostic cycle and check for stored codes and go from there
Dave
- You must be logged in to reply to this topic.