Smeg dishwasher E4.

Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › Smeg dishwasher E4.

Viewing 2 posts - 1 through 2 (of 2 total)
  • Author
    Posts
  • June 25, 2018 at 8:29 pm #94133
    aqualectric
    Participant

    Smeg dishwasher. Model:- Di612CA9. S/N:- 91216 0709 0.

    Keep getting E4 error as soon as the program starts. I have searched for the NTC; can’t find it! They are normally on the back of the door panel but looked up the part just now and this one resembles the Whirlpool type that bayonet fits to the sump. I did look around the sump but the machine’s rear legs were tiled in and inaccessible so my view was limited.
    Is E4 an NTC failure on this type? I detest repairing Smeg stuff so any help would be appreciated like part number and location of the NTC.

    Thanks!!

    Steve.

    June 25, 2018 at 10:23 pm #456538
    electrofix
    Moderator

    Re: Smeg dishwasher E4.

    yes correct feeler type in sump

    cant 100{e5d1b7155a01ef1f3b9c9968eaba33524ee81600d00d4be2b4d93ac2e58cec2d} confirm E4 error but looks likely

    did you try a bit of hot water in the sump as a test. Alters resistance on start up so if it goes for longer chances are its correct fault

    Dave

  • Author
    Posts
Viewing 2 posts - 1 through 2 (of 2 total)
  • You must be logged in to reply to this topic.