Hotpoint WMBF742 goes dead

Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › Hotpoint WMBF742 goes dead

Viewing 4 posts - 1 through 4 (of 4 total)
  • Author
    Posts
  • July 12, 2018 at 11:22 am #94238
    chitts
    Participant

    Just looking at this machine that the customers said was dead.
    I switched on and all seemed OK, then after 5mins it just died.
    While I was chatting about it, suddenly it started again.
    I checked all the plugs internal and external, no fault.
    I suspect a module fault but as it’s working again……
    Any clues?

    July 12, 2018 at 11:44 am #456790
    electrofix
    Moderator

    Re: Hotpoint WMBF742 goes dead

    as long as its not

    the socket , the supressor or the plug and lead

    then yes its probably the board

    i would plug it in a different socket to make sure for a start

    Dave

    July 12, 2018 at 12:09 pm #456791
    alster
    Participant

    Re: Hotpoint WMBF742 goes dead

    As above & have a good look at the suppressor- ive had a couple where there’s a poor/ overheating connector plug.

    July 13, 2018 at 12:07 pm #456792
    chitts
    Participant

    Re: Hotpoint WMBF742 goes dead

    Thanks.
    I’ve had overheating suppressor plugs, so was my 1st option. Socket outlet fine too. When I left the machine was working OK. Customer confirms it’s completed and done another programme.

  • Author
    Posts
Viewing 4 posts - 1 through 4 (of 4 total)
  • You must be logged in to reply to this topic.