Hotpoint WMBF742 goes dead

[chitts]

Just looking at this machine that the customers said was dead.
I switched on and all seemed OK, then after 5mins it just died.
While I was chatting about it, suddenly it started again.
I checked all the plugs internal and external, no fault.
I suspect a module fault but as it’s working again……
Any clues?

[electrofix]

Re: Hotpoint WMBF742 goes dead

as long as its not

the socket , the supressor or the plug and lead

then yes its probably the board

i would plug it in a different socket to make sure for a start

Dave

[alster]

Re: Hotpoint WMBF742 goes dead

As above & have a good look at the suppressor- ive had a couple where there’s a poor/ overheating connector plug.

[chitts]

Re: Hotpoint WMBF742 goes dead

Thanks.
I’ve had overheating suppressor plugs, so was my 1st option. Socket outlet fine too. When I left the machine was working OK. Customer confirms it’s completed and done another programme.

[Author]

Posts