Hotpoint Dryer No Display

Home › Forums › Public Support Forums › Help And Support › Tumble Dryer Help Forum › Hotpoint Dryer No Display

Viewing 4 posts - 1 through 4 (of 4 total)
  • Author
    Posts
  • September 20, 2018 at 8:54 am #94685
    Nathan.Gartland
    Participant

    HI I have a Hotpoint TCHL73BRPUK and im not getting any display.
    I have checked the electrics and all is fine.
    I have changed the main PCB and this has not solved my issue. I have also changed the display board and still not powering up. I have check the circuit from the pcb to display board and the cable is fine, also getting 240v through the cable.
    Can anyone suggest a fix for this.

    Nathan

    September 20, 2018 at 11:32 am #458002
    electrofix
    Moderator

    Re: Hotpoint Dryer No Display

    you say you have changed the main pcb but how ?

    these boards are blank when you get them and need to be programmed. so unless you bought the programmer and software then it wont work

    Dave

    September 20, 2018 at 2:55 pm #458003
    Nathan.Gartland
    Participant

    Re: Hotpoint Dryer No Display

    I ordered it from my own supplier who gets the boards programmed.
    I am a domestic engineer

    September 20, 2018 at 8:59 pm #458004
    electrofix
    Moderator

    Re: Hotpoint Dryer No Display

    ok

    not sure what to suggest as have no relevant tech

    1 are you sure he has programmed the correct software for the Ind code ?

    2 what was initial fault or was that a blank display problem ?

    If you are a professional then why not apply for trade access as we can do a lot more with members such as provide tech info where available which we cant do on a public forum

    Dave

  • Author
    Posts
Viewing 4 posts - 1 through 4 (of 4 total)
  • You must be logged in to reply to this topic.