Zanussi d/w inlet valve wont shut off

Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › Zanussi d/w inlet valve wont shut off

Viewing 5 posts - 1 through 5 (of 5 total)
  • Author
    Posts
  • October 4, 2018 at 5:59 pm #94776
    slyp98
    Participant

    Hi all , im having this issue where the water fills , then stops for 10 seconds then fills again after 60 seconds the wash mptor kicks in but the inlet valve staus open and keeps filling and wont stop anyone
    PNC 91151611000 ZDF 14011WA

    October 4, 2018 at 9:04 pm #458298
    electrofix
    Moderator

    has the pressure switch chamber been modded on this one as its listed as models that are affected ?

    Dave

    October 4, 2018 at 9:44 pm #458299
    slyp98
    Participant

    Dunno Dave I doubt it, where’s the chamber, all I can find is the water chamber on the l/h side there’s no switches anywhere to be found does the pcb control the length of time for filling?

    October 7, 2018 at 6:42 pm #458300
    whitevanman
    Participant

    have you changed the water valve ?, I had issue on Boshe washer, no issue with filling when off, but kept filling when water supply voltage stopped.

    October 22, 2018 at 11:30 am #458301
    slyp98
    Participant

    all ok again chaps installed that service kit Dave , did the trick thanks again

  • Author
    Posts
Viewing 5 posts - 1 through 5 (of 5 total)
  • You must be logged in to reply to this topic.