Beko dc7112w Dryer

Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › Beko dc7112w Dryer

Viewing 5 posts - 1 through 5 (of 5 total)
  • Author
    Posts
  • November 19, 2018 at 8:10 am #95026
    ddirect
    Participant

    Beko dc7112w not heating, checked stats and heater, would the pcb be the culprit or something else.
    thanks for reading

    November 19, 2018 at 9:21 am #459141
    electrofix
    Moderator

    Are you sure the heater NTC is ok. have had lots fail on these

    I carry an old Hotpoint heater NTC and link the wires in to test it

    Dave

    November 19, 2018 at 7:29 pm #459142
    ddirect
    Participant

    Checked ntc seemed ok

    November 19, 2018 at 9:04 pm #459143
    electrofix
    Moderator

    if all ok then sounds like a pcb problem

    have looked up part no and I get 2963163001

    but cant see one in site shop or qualtex

    You could look at the relays on the board as these are a possible source of failure

    Dave

    November 20, 2018 at 4:13 pm #459144
    ddirect
    Participant

    Everywhere I’ve looked the pcb isn’t available for 28 days, customer wont wait so I referred her back to beko and told her to phone them
    thanks for the input

  • Author
    Posts
Viewing 5 posts - 1 through 5 (of 5 total)
  • You must be logged in to reply to this topic.