Indesit washing machine WIN 602 (EU)

Home › Forums › Public Support Forums › Help And Support › Washing Machine Help Forum › Indesit washing machine WIN 602 (EU)

Viewing 6 posts - 1 through 6 (of 6 total)
  • Author
    Posts
  • November 28, 2018 at 12:33 pm #95069
    piperh
    Participant

    Hello. Looking for help with what I think is an electronics problem. The machine turns on but won’t start any programme, no flashing leds just a steady red one below the start button.

    Any leads/suggestions appreciated

    November 28, 2018 at 10:32 pm #459282
    iadom
    Moderator

    You appear to be posting from Spain, that model is not sold in the UK so our technical information does not cover it sadly. 🙁

    November 28, 2018 at 10:40 pm #459283
    electrofix
    Moderator

    did look this machine up and it seems to have a brush motor. worn out brushes can cause machine not to start. Check the brushes are long enough to touch the armature

    Dave

    November 29, 2018 at 10:43 am #459284
    piperh
    Participant

    Thanks. I assume I’d access the motor by removing the back cover, yes?

    November 29, 2018 at 12:43 pm #459285
    electrofix
    Moderator

    since the brushes are facing the front of the machine i access them by tilting the machine back at 45 degrees against a wall and lie on the floor

    as a quick test give each brush a sharp knock with a screw driver then try the machine. if it works then you need new brushes if it does not then you need to take brushes off to check them

    Dave

    January 15, 2019 at 11:11 am #459286
    piperh
    Participant

    Thanks for the tip. I tried the quick test but machine didn’t respond so I ruled out the brushes, as suggested. In the end a technician replaced a fried circuit board

  • Author
    Posts
Viewing 6 posts - 1 through 6 (of 6 total)
  • You must be logged in to reply to this topic.