hotpoint wmef 943 puk

Home › Forums › Public Support Forums › Help And Support › Washing Machine Help Forum › hotpoint wmef 943 puk

Viewing 4 posts - 1 through 4 (of 4 total)
  • Author
    Posts
  • December 29, 2018 at 4:35 pm #95211
    missmouse
    Participant

    Can anyone help please?
    Our washer has developed an intermittent fault in that it will run a wash cycle ok but at the end all the lights flash with the code F06 in the main display, also there is a constant clicking from the door lock . When this happens the only way to open the door & reset everything is to power off & open the door with the emergency manual pull.
    Is this likely ( as Ive been told, the door lock itself?
    Thanks

    December 29, 2018 at 5:47 pm #459705
    electrofix
    Moderator

    its s door lock fault and the lock is probably the cheapest option

    Dave

    December 29, 2018 at 9:15 pm #459706
    missmouse
    Participant

    Thanks for that! Ill give it a try as they are only about £15. Is it an easy job to change? I dont see any screws behind the door like older machines, just 2 little plastic bumps!

    December 29, 2018 at 11:47 pm #459707
    electrofix
    Moderator

    push bumps in at the same time as slide lock to the left. it then unhooks from the door. new one goes back in the same way.

    Dave

  • Author
    Posts
Viewing 4 posts - 1 through 4 (of 4 total)
  • You must be logged in to reply to this topic.