indesit we16 uk

Home › Forums › Public Support Forums › Spare Parts Help › indesit we16 uk

Viewing 8 posts - 1 through 8 (of 8 total)
  • Author
    Posts
  • May 11, 2005 at 6:42 pm #9523
    admin
    Keymaster

    hi all,

    lookin for a pcb/module for the above washing machine.

    just before it started to smoke we got an error code f 12…. any ideas please.

    the blue label on the module says CCD or COD.215005377.30

    there is Ariston FE to the left side and 39-01 top left.

    i have found simular looking boards for all others exept this machine 🙁 🙁 🙁

    cheers

    kerplunk.

    May 11, 2005 at 7:53 pm #134466
    Penguin45
    Participant

    Re: indesit we16 uk

    Pcb is p/no C00084331, and is supplied without the eeprom fitted. Contact spares@ukwhitegoods.com for price and availibility etc.

    Regret fault 12 does not seem to be a valid fault code – however it is always worth checking the heater circuits on these.

    Regards,
    Penguin45.

    May 12, 2005 at 5:19 pm #134467
    admin
    Keymaster

    Re: indesit we16 uk

    thanks for that,

    just to be sure this is the right pcb, it is the one near the floor to the left when facing the back 100mm x 250mm approx.

    eprom?? scuse my ignorence.. 😳

    cheers

    kerplunk

    May 12, 2005 at 5:54 pm #134468
    clyde
    Participant

    Re: indesit we16 uk

    kerplunk wrote:thanks for that,


    eprom?? scuse my ignorence.. 😳

    The eprom is a little microchip that plugs into the module giving the applaince it’s correct features/identity

    The WE16 is part of the evolution range which carries a 5 year parts guarantee with indesit so for around £90 they will fix it for you,

    Regards

    Clyde 8)

    May 12, 2005 at 6:29 pm #134469
    admin
    Keymaster

    Re: indesit we16 uk

    F12 is no comunication between theconsole and main power board, may need both boards aslo the connections between the may just need a fiddle with as this can cause same fault.

    May 13, 2005 at 2:36 pm #134470
    admin
    Keymaster

    Re: indesit we16 uk

    thanks clyde 😉

    i checked with the uk hq and yoom correct 😀 😀 problem solved you may think!!

    not quite….. we live in brittany…. but it’s ok… they have european cover on this machine also 😀 😀

    thanks for your valauble help guys, i will let you know if i am successful with my warranty.

    salut :wave:

    May 25, 2005 at 7:59 am #134471
    admin
    Keymaster

    Re: indesit we16 uk

    Fixed mine in 2 minutes.

    unplugged power!!!!

    removed lid 2 screws at rear slid back

    found circuit boards on front dissconnected/reconnected one at a time using an eraser to clean board contacts.

    put lid on

    fault gone.

    DON’T DO THIS YOURSELF GET A QUALIFIED PERSON TO HAVE A LOOK.

    unless you are like me and like taking things apart! BUT DISSCONNECT MAINS FIRST

    June 29, 2005 at 11:23 pm #134472
    Jim_1
    Participant

    Hi there…the F 12 fault is none communication between the control console and the main board in the base of the appliance…however both of these board contain eeproms…the fault could be as simple as a faulty connection at the control console and or the main board..if the appliance is under 5yrs old then all parts are free you just pay the service callout (£89.00) if the appliance is over 5yrs old id seriously consider scrapping the same..you must have the model and serial numbers of your appliance to obtain correct eeproms..and you may need a motor…merloni advise changing boards eeproms and motor …costly if your paying..good luck ..ex merloni engineer

  • Author
    Posts
Viewing 8 posts - 1 through 8 (of 8 total)
  • You must be logged in to reply to this topic.