Miele G1143SC Dishwasher

Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › Miele G1143SC Dishwasher

Viewing 7 posts - 1 through 7 (of 7 total)
  • Author
    Posts
  • February 21, 2019 at 12:11 pm #95524
    WhiteVanMan1
    Participant

    The dishwasher fills to what appears to be the right level, then stops and starts for a few times, then stops and the start/rinse/end led’s all flash. Any ideas please? I am suspecting a pressure switch problem. Cheers. Steve.

    February 21, 2019 at 1:28 pm #460607
    electrofix
    Moderator

    there is a pressure switch on the main pump that detects water pressure of the pump outlet. Am guessing a bit but sounds likely

    Dave

    February 21, 2019 at 1:34 pm #460608
    WhiteVanMan1
    Participant

    Cheers Dave. I know these machines detect pressure to the spray arms. Here’s hoping it’s just blocked šŸ™‚

    February 21, 2019 at 1:59 pm #460609
    electrofix
    Moderator

    this might be worth a look. its for American machines but cant see them inventing a new system just for the states

    Dave

    https://www.manualslib.com/manual/801663/Miele-G1000.html?page=2#manual

    February 23, 2019 at 3:21 pm #460610
    thedoood
    Participant

    Iā€™d agree with Dave..pressure switch mounted on circ motor..gets gunged up…I tried cleaning it out once..but had to get new one for same error as yours..

    February 24, 2019 at 7:08 am #460611
    baron
    Participant

    Or simply, you have inside impelor some plastik bags pieces or other things… which reduce water pressure flow…

    October 13, 2020 at 11:01 am #460612
    WhiteVanMan1
    Participant

    Cheers all for your assistance. I had checked for possible blockages. When I told the customer the pric of a pressure switch they decided to buy a new dishwasher . Steve.

  • Author
    Posts
Viewing 7 posts - 1 through 7 (of 7 total)
  • You must be logged in to reply to this topic.