Bosch Oven HBG6753S1A/35 (FD9705) – error E6400 a few mins into Pyrolytic cleaning.

Home › Forums › Public Support Forums › Help And Support › Cooker And Oven Forum › Bosch Oven HBG6753S1A/35 (FD9705) – error E6400 a few mins into Pyrolytic cleaning.

Viewing 4 posts - 1 through 4 (of 4 total)
  • Author
    Posts
  • February 25, 2019 at 12:00 am #95537
    disco4now
    Participant

    We have had this oven about 12 months and it is functioning well. Recently tried the Pyrolytic cleaning for the first time. The first time used Pyrolytic level 3. After a few minutes error E6400 appeared with message to press the On/Off.
    Tried it again a bit later on Level 1 with the same result. Other than this is it is still working well.

    Any clues to what the E6400 error code means.

    Thanks
    Gerry

    February 25, 2019 at 9:32 am #460672
    electrofix
    Moderator

    you don’t need to know, its covered by a 2 year guarantee let them worry about it

    Dave

    June 20, 2019 at 1:10 pm #460673
    disco4now
    Participant

    We have had it fixed under warranty. E6400 is about a ventilation flap not opening when the oven heats up. Was happening about 4 minutes into the cleaning cycle. You could hear the motor turning that opens the flap via a cam, but it just kept cycling as it did not stop with the cam in the correct spot to keep the flap open.

    June 20, 2019 at 1:51 pm #460674
    electrofix
    Moderator

    thanks for posting back. glad you sorted it

    Dave

  • Author
    Posts
Viewing 4 posts - 1 through 4 (of 4 total)
  • You must be logged in to reply to this topic.