zanssi dishwasher heats occasionally

Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › zanssi dishwasher heats occasionally

Viewing 8 posts - 1 through 8 (of 8 total)
  • Author
    Posts
  • March 8, 2019 at 8:01 pm #95574
    slyp98
    Participant

    Hi all , I have this zanussi pnc 91151914803 only heats when it wants , checked all the usual loose wiring , broken wires in door , i dont see a thermostat but i see there is one available anyone come across one of these thanks

    March 10, 2019 at 6:05 pm #460785
    baron
    Participant

    It can be; tacho; NTC&OWI; analog pressure switch… but any of them should gave errors at least inside memory. You should read which one is it. (last tree are stored).
    Just after that I can try to help.

    March 12, 2019 at 11:19 am #460786
    slyp98
    Participant

    Thanks Baron, i wonder if there is engineers manual Available for this model,

    March 13, 2019 at 1:40 pm #460787
    slyp98
    Participant

    I fitted a pressure sensor kit to one of these a few months back for issues with not draining , could this cause a non heating issue

    March 13, 2019 at 7:48 pm #460788
    baron
    Participant

    slyp98 wrote:I fitted a pressure sensor kit to one of these a few months back for issues with not draining , could this cause a non heating issue

    It could be or not…
    When you fitted the kit did you run the service program? in order to calibrate the sensor? Read the errors, test each perpheral and run the test.
    tech info I can’t sent because of size limitation.

    March 14, 2019 at 1:07 pm #460789
    electrofix
    Moderator

    slyp98 wrote:Thanks Baron, i wonder if there is engineers manual Available for this model,


    manual should not be a problem

    let me have an email add

    Dave

    March 14, 2019 at 1:45 pm #460790
    slyp98
    Participant

    baron wrote:

    It could be or not…
    When you fitted the kit did you run the service program? in order to calibrate the sensor? Read the errors, test each perpheral and run the test.
    tech info I can’t sent because of size limitation.

    I didnt run any service program as i wasnt aware of it , i never got any call to say there was a problem since

    March 15, 2019 at 8:56 am #460791
    baron
    Participant

    slyp98 wrote:

    I didnt run any service program as i wasn’t aware of it , i never got any call to say there was a problem since

    It doesn’t mean that is right this way.
    It’s best to do like previous pressure sensor changing instructions:
    “Run the line test to calibrate the correct parameters of pressure sensor.“

  • Author
    Posts
Viewing 8 posts - 1 through 8 (of 8 total)
  • You must be logged in to reply to this topic.