Neff Dishwasher S51T69X3GB/74 Sump leak

Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › Neff Dishwasher S51T69X3GB/74 Sump leak

Viewing 4 posts - 1 through 4 (of 4 total)
  • Author
    Posts
  • April 30, 2019 at 5:05 pm #95812
    ray.t
    Participant

    Hi,

    I have been to this dishwasher today that has a leak and it’s coming from the sump. I have had a look at the Neff site and can see that there is a repair set for the sump (part no 11002716) but I just wondered how you fit it. Can it be done with the front and side panels removed or is there more to it?

    Cheers,
    Ray

    April 30, 2019 at 9:07 pm #461432
    timdowning
    Participant

    Remove side panels.

    Release door ropes from hinges.

    Remove front access panel.

    Lay machine on its back.

    Pull down base. Metal lugs latch into plastic base.

    Remove 4 Screws holding sump in place.

    Etc, etc.

    Not too bad a job. Allow an hour or so plus 30 minutes to run a quick wash to make sure it’s all running ok. I always replace the distributor whilst I’m at it.

    May 1, 2019 at 5:33 am #461433
    ray.t
    Participant

    Great, thanks for that.
    Ray

    June 6, 2020 at 10:51 am #461434
    twicknix
    Participant

    Is this a common occurrence for the sump to leak? I spent ages trying to figure out why the dishwasher is leaking despite replacing the pump seal. It wasn’t apparent until 4 or 5 washes later.

  • Author
    Posts
Viewing 4 posts - 1 through 4 (of 4 total)
  • You must be logged in to reply to this topic.