Miele dishwasher starting and stopping G858SCVI PLUS

Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › Miele dishwasher starting and stopping G858SCVI PLUS

Viewing 4 posts - 1 through 4 (of 4 total)
  • Author
    Posts
  • June 3, 2019 at 2:48 pm #95947
    boselecta
    Participant

    Hi folks,

    The wash motor wasnt coming on at all so I removed the motor and removed some plastic blocking the impellers.

    The wash motor now comes on but after about 30 seconds it stops, it then pauses for about 20 seconds before starting again.
    The wash motor does this start stopping about 5 times before flashing the inlet outlet light.

    Any ideas please?

    June 6, 2019 at 7:38 am #461807
    baron
    Participant

    Have you tried again after 24h? because sometimes when you work on circulation pump some water could entry into heating relay or even at pressure switch…

    June 6, 2019 at 8:16 am #461808
    electrofix
    Moderator

    this may help, its American models but info should be very close covers G858

    https://www.manualslib.com/manual/1052537/Miele-G-600-Series.html?page=2#manual

    Dave

    June 9, 2019 at 9:13 pm #461809
    boselecta
    Participant

    Hi,

    Thanks for the replies, yes I went back this week to double check things and its still doing the same.

    Might try a pressure switch as can’t think of anything else.

    Thanks for replying

  • Author
    Posts
Viewing 4 posts - 1 through 4 (of 4 total)
  • You must be logged in to reply to this topic.