BOSCH WFV2000 Noisy during spin

Home › Forums › Public Support Forums › Help And Support › Washing Machine Help Forum › BOSCH WFV2000 Noisy during spin

Viewing 2 posts - 1 through 2 (of 2 total)
  • Author
    Posts
  • May 16, 2005 at 7:55 pm #9617
    admin
    Keymaster

    My machine suddenly started to make a racket during spin cycle, it sounded as if there was something stuck in between the drum and the outer drum, I got a torch and tried to see through the holes in the inner drum but couldnt see anything.

    I removed what I can think of as either a thermostat or a pressure sensor in the back of the outer drum and looked for something in there but I could see nothing, but I noticed that when I spun the drive manually the drum did not look as if it was round ie it did not run true. The bearing has about 1 mm of play and I suspect the bearings have gone, if so how would I replace it? is is worth it and what would I need tools and parts.

    Thanks

    May 16, 2005 at 8:21 pm #134881
    Penguin45
    Participant

    Re: BOSCH WFV2000 Noisy during spin

    We can’t tell you exactly what is involved in replacing the bearings from the work point of view. It is a matter of replacing the rear crosspiece in its entirety – p/no 283726 £112.08 plus VAT plus P&P 😯 .

    Best bet would be to go to http://www.bshappliancecare.com and follow the links – the exploded diagrams will give you a good idea of what’s going to be involved.

    Regards,
    Penguin45.

  • Author
    Posts
Viewing 2 posts - 1 through 2 (of 2 total)
  • You must be logged in to reply to this topic.