Candy WM EVO14104L/1-80

Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › Candy WM EVO14104L/1-80

Viewing 4 posts - 1 through 4 (of 4 total)
  • Author
    Posts
  • August 2, 2019 at 4:09 pm #96215
    pmb
    Participant

    candy Washing machine evo14104L/1-80. Display lights up but nothing happens when I press start, no fault code .
    its a machine I collected when I installed their new machine,
    guess it’s the PCB , it’s a special order with connect, anyone had this fault.

    August 2, 2019 at 5:30 pm #462702
    electrofix
    Moderator

    be careful with the pcb there are a few changes depends on serial no

    found the test routine if you want it

    have you checked child lock and door lock
    also look at board and find door triac and look for damage
    if its got brushes check them first

    Dave

    August 2, 2019 at 6:11 pm #462703
    murv
    Participant

    I would check the display module (start tact switch) and the plastic module container.

    August 4, 2019 at 9:12 am #462704
    pmb
    Participant

    Thanks door lock lock and brushes were the first things I checked, also child lock, so I am scraping it.
    Candy and Hoover are not an expensive machine,

  • Author
    Posts
Viewing 4 posts - 1 through 4 (of 4 total)
  • You must be logged in to reply to this topic.