NEFF oven

Home › Forums › Public Support Forums › Help And Support › Cooker And Oven Forum › NEFF oven

Viewing 13 posts - 1 through 13 (of 13 total)
  • Author
    Posts
  • August 5, 2019 at 12:49 pm #96226
    JSTANLEY
    Participant

    Hi, just moved into a new house and having problems with a NEFF oven.
    it has alot of different functions which most work. But the main fan doesn’t work and neither does one of the bulbs in the oven. The other bulb works with grill etc but the other side connected with using fan oven option doesn’t.

    Can anyone help me out with what to check please?

    Its a NEFF E-Nr B1641N1GB/09
    FD8209

    August 5, 2019 at 4:58 pm #462729
    electrofix
    Moderator

    if the unit has a clock has it been set to manual

    just so you know this unit was built sept 2002

    Dave

    August 5, 2019 at 7:39 pm #462730
    JSTANLEY
    Participant

    Thank alot for the reply. Only just moved into a house with this oven in.
    ive set the clock to the correct time if thats what you mean?

    August 5, 2019 at 8:11 pm #462731
    electrofix
    Moderator

    since the clock controls the oven if the clock is not set to manual then the oven wont work

    if its not that then cant think of anything else simple and the control part look expensive

    Dave

    August 5, 2019 at 8:29 pm #462732
    JSTANLEY
    Participant

    Do you know where i could get a wiring diagram for it?

    August 5, 2019 at 9:18 pm #462733
    electrofix
    Moderator

    part diagrams yes no prob

    wiring info is hard to find. only available to designated agents and I am not one so have to use experience and educated guesses

    Dave

    August 6, 2019 at 12:17 pm #462734
    JSTANLEY
    Participant

    Ah ok thanks.

    Once i strip the casings off whats the best way to test the fan?
    got a feeling it may be the main board/pcb so will remove that and see if theres anything abvious

    August 6, 2019 at 6:54 pm #462735
    electrofix
    Moderator

    well if it was the fan the element would still get hot

    most time fan fails mechanically so see if it spins easily

    you can check both with a multimeter


    Dave

    August 6, 2019 at 8:39 pm #462736
    JSTANLEY
    Participant

    The element does get hot and the fan spins easily

    August 6, 2019 at 9:43 pm #462737
    electrofix
    Moderator

    could just be a faulty motor then

    worth checking

    Dave

    August 6, 2019 at 10:22 pm #462738
    JSTANLEY
    Participant

    What ohm setting do i use on a multimeter? And what should i expect to see if its good or bad?

    August 7, 2019 at 12:07 am #462739
    electrofix
    Moderator

    if its open circuit you will see readings of thousands of ohms

    if you get a reading under 1000 then there is a circuit there


    Dave

    September 8, 2019 at 10:41 am #462740
    JSTANLEY
    Participant

    Only just had time to have another look.
    the fan hasn’t got any power going to it.
    Anyone know what to check? Took the pcb out to see if any burnt tracks but none found. Anyone know how to check if it is the pcb?

  • Author
    Posts
Viewing 13 posts - 1 through 13 (of 13 total)
  • You must be logged in to reply to this topic.