- This topic has 5 replies, 4 voices, and was last updated 20 years, 10 months ago by
.
-
Posts
-
called this evening to Servis M3025
problems are
1] machine will take in water on some occasions when programme is selected
NO WASH ACTION other than 2 revs of drum.
2] Select spin only cycle- drain pump activates—2 revs of drum NO SPIN at all
3] Checked voltage at MOTOR- NO volts at all
4] selected SPIN CYCLE 2nd time–takes in water and carrys out wash cycle action.
5] which ever programme you select..programme does not time out, it just runs until on/off swtich is pressed.
CAN WE Say PROGRAMMER AS SHOT IT —OR IS THERE A RESET PROCEEDURE?if programmer is u/s any idea of cost
Machine is just 22 months old
many thanks
Graham
CORNFLAKES
Re: SERVIS WASHER M3025
cornflakes wrote:Machine is just 22 months old
It lasted that long ? 😆
Module part number is 546037800 at £85.75 ex VAT from Connect, but you can get a recon much less than that 😉
Dave.
Re: SERVIS WASHER M3025
Good point Lawrence, check for water dripping onto the motor often from an overflow in the SD, makes a lovely mess.
K.
- You must be logged in to reply to this topic.