- This topic has 8 replies, 2 voices, and was last updated 6 years, 5 months ago by
.
-
Posts
-
My Indesit washer dryer IWDC6125 was on whilst the circuits were tripped. It now refuses to work through any cycle properly and ALL lights flash continuously, it fills but won’t drain and the only way to stop it is to turn it off at the mains.
I’m looking for some idea of what might be wrong so I’m a bit more clued up before someone comes to look at it really. A rough idea of its its fixable or if I’m likely to be looking at replacing would be good too, just so I’m prepared. This site’s guide has suggested an F15 fault.
The machine is only 2.5 years old. The manual doesn’t help at all and neither does the Indesit site.
Thanks in advance
are all the leds flashing or only some of them ?
if you set the machine on drain will it just drain ?
Dave
All lights are flashing across the top horizontal row (ECO time etc). The lights in a row on the right (vertical, 3h, 6h, 9h etc) are static.
It refuses to drain, if we can get it to drain it automatically tries to refill.
The site says the photos I’ve tried to take are too big to upload.
At least I can direct someone when they come out. Do you think it is a very expensive fault to fix, am I going to be looking at replacing the whole washer/dryer? Thank you for replying.
- You must be logged in to reply to this topic.