- This topic has 8 replies, 3 voices, and was last updated 6 years, 4 months ago by
.
-
Posts
-
My sensor dry dual heat model diplomat apm8620 won’t heat I’ve trued reset button worked a few times then heated up to much now it comes in drum turns but blows cold air please help with this.
As Dave says, you need to be able to test parts to see if they are working. A Multimeter is the piece of Equipment used to do this, you need to have a Multimeter and be able to use it to carry out any fault finding. Please call a local repairer to look at your appliance.
I didn’t really want to pay to much I was hoping to solve the issue, so firstly the dryer stopped giving hot air so pulled it out and reset it then it was kk then it tripped again reset it again then it was drying the clothes but really over heating like burning smell then got someone to undo vent hose there was some fluff removed that all seemed fine then on Sunday I put clothes in starting blowing cold air pulled it out again but this time nothing worked not the reset button or anything drum turn but is blowing cold air. I really appreciate your help thanks.
Sorry but we can’t help you unless your able to test parts, without this ability your just playing guess and we don’t do that. You would just be swapping parts on the off chance that you hit the right part, this is a really bad and expensive way to do things.
- You must be logged in to reply to this topic.